Wetcast Moulds

 Innovative and product-specific

Via Domo® Smart Wetcast Moulds

Reinforced polyurethane mouds

 Our uniquely reinforced moulds guarantee optimum dimensional stability. The moulds are nevertheless sufficiently flexible, even for manual demoulding. In addition, the side walls are prevented from collapsing and dimensional changes are prevented.

 

In our Via Domo Smart Wetcast series we distinguish between two basic types: 'Type L' and 'Type S'.


Smart Wetcast Form Typ S

  • For the first time in the world, the side walls are reinforced with special high-quality strips (18-24 mm wide) and the floor with glass fibre fabric.
  •  These moulds (single or multiple moulds) are self-standing, no production frames or production boxes are necessary. They can be screwed to the support board.
  •  Due to the lower weight and the no longer necessary production frames / crates, handling in production is simpler.

 


Smart Wetcast Form Typ L

  • For the first time in the world, the side walls are reinforced with special strips just a few millimetres thick and integrated into the wall. There is also a glass fibre fabric in the floor.
  • This type of mould is used with production frames or boxes, both as single and multiple moulds.
  • Undercuts are possible to the same extent as with conventional moulds. The elasticity is also available to the usual extent.

Other mould types

  • Conventional polyurethane and silicone moulds
  •  Multiple moulds in different Shore hardnesses
  • Large moulds e.g. up to 2.50 m
  • Special moulds

  • Thin matrices made of high-quality polyurethane

Via Domo® Smart Precast Mats

  • A special high-performance polymer allows us to produce individual structures and surfaces as ultra-thin structural mats (about 2 mm thick). A fully automated process engineering enables a constant strength.
  • Our prototyping enables exclusive surfaces such as natural stone surfaces or structures developed using CAD. Logo cut-outs are also possible via our CAD construction and special process engineering.

  • Based on the 'Smart Precast Mats', Via Domo® has developed the flexible frame system 'Smart Flex': Change the structural mats and create any conicities, chamfers, radii or spacers using the frame system.

 


Brand new!

Hardrock Moulds

Hard Wetcast moulds with excellent sharpness of detail

 

  • Sharpness of detail as if made of polyurethane moulds
  • Very short delivery time
  • No disadvantages as with ABS moulds (no mandatory conicity, high strength, high temperature resistance, exact dimensional accuracy, no thin corners)
  • Any conceivable surface possible, even complex natural stone surfaces